Exterior Painting Tips by Exterior Painters in Toronto
Exterior Painting is not an easy task to do, a long process, and certainly require special precaution. However, the investment of time and money is usually well worth it, since the exterior painter job has a direct impact on the appearance of your home.
Before refreshing your exterior paint, there are certain steps you must take to ensure that your project exterior wall paint will be durable and have the desired effect on your home.
So here are some tips that you should read by House painter Toronto before you start your work.
Table of Content
- Planning for Exterior Painting
- Exterior Painting tools
- The choice of exterior paint finish
- The choice of color: exterior house colors
- Exterior painting and temperature: plan the schedule
- Surface preparation
- Safety first
- The durability of house exterior paint?
- Exterior paint: sustainable choice
- Bonus painting tips
Planning for Exterior Painting
While the interior painting job requires some planning, this is doubly true for painting exterior walls also. Here are the main key points to watch for:
Exterior Painting tools
There are many kinds of painting tools that may cost you a lot and for one-time use, it could not be value for money.
But with the help of a few good basic tools will save you a lot of money and ensure a good quality job.
Here’s what you should get first:
- At least two good quality paintbrushes (ideally one at an angle about 1 inch wide for trimming and tight spots, and one about 4 inches wide).
- A scraper.
- Sandpaper (ideally relatively coarse-grained sandpaper, and a finer one).
- A ladder or stepladder that will allow you to safely cover the entire surface to be painted.
The choice of exterior paint finish
Not so long ago, oil paint was recommended for Exterior Painting siding paint. Oil paint, thanks to the VOC (volatile organic compound) law, has almost completely disappeared from the shelves. Fortunately, water-based paints today can offer virtually the same luster and durability.
As for the different types of finishes, here are the choices available to you for exterior painting:
- High Gloss: This type of finish is often preferred for doors and exterior trim. As the name suggests, it is very glossy and comes close to the look of an oil painting.
- Semi-gloss: Semi-gloss is often used for its durability. The semi-gloss, like the very gloss for that matter, is resistant to mold.
- Satin: Often used for railings, the satin finish is also mildew resistant.
- Matte: Very low-reflective, the matte finish is the easiest to apply and correct, and imperfections are less visible.
The choice of color: exterior house colors
To choose the right Exterior Painting color for your home, you need to assess what you already have as well as your surroundings.
Do you have colored window outlines? A dark or light wood porch and exterior stairs, what color will match your exterior stain colors best? What color is your roof?
Do you plan to change it soon? The amount of sunlight in your home will also have an impact on the color chosen. Think about all the seasons when making your choice.
In the winter, some places maybe get lighter as the trees shed their leaves. Think about it!
Consult with decoration professionals if you are not sure that you are making the right choice. They can enlighten you and offer you paint colors that will meet your tastes.
Exterior painting and temperature: plan the schedule
You will need to plan your exterior painting jobs for the weather, so you should rely on the weather forecast as much as possible. Here are some basic temperature tips:
- Never paint in strong sunlight, otherwise, the drying will be too fast and you could see the brush strokes and roller. It is best to follow the shadows.
- Do not paint if the wind is too strong, otherwise, it will dry too quickly and dirt may seep into the new paint.
- Do not paint if there has been raining in the last two days or if there is a chance of precipitation in the next two days.
- Paint between 15 °C and 25 °C ideally. Never paint if the temperature is below 10 °C or above 30 °C.
- Avoid painting if there is fog, dew, or if the humidity is too high (ideal between 30% and 55%).
As with interior painting, the preparation of the surface to be painted is essential in exterior painting. This can be the difference between a pickup result and a perfect finish. Where the harsh winter can damage and damage the exterior siding.
It is estimated that almost 75% of the time you spend on your paint job should be spent on surface preparation. Here are our tips:
- Remove anything removable on your surface to be painted (mailbox, address, garden hose, etc.).
- Clean the area to be painted. You may have to use a scraper, brush, steel, wool, or sandpaper to remove chipping old paint, rust, and blemishes.
- Fill in the holes and cracks using an acrylic sealant.
Exterior paint can sometimes put you in a difficult position, especially if you have to paint tall surfaces. Your safety should therefore be a top priority.
If you do not have the necessary equipment to ensure your safety, or if you are not confident in your means, it may be better to do business with a professional.
The durability of house exterior paint?
The durability of your paint depends on several factors. The sun, temperature changes, and urban residues like dust and smog can affect the life of exterior paint.
Usually, you will need to repeat the painting steps between 10 and 20 years. Watch for signs like paint chipping or discoloration so you know when to paint your home’s exterior siding.
Exterior paint: sustainable choice
Think about it! Repainting the exterior of a house is much more durable than changing it completely. Instead of eliminating what you already own, you can give your home a whole new look with paint. Exterior painting will protect your siding against bad weather, humidity, temperature, fluctuations, and dirt. Plus, coating paint is a lot less expensive than a complete replacement!
Bonus painting tips
- Watch out for drops and backstage. It is best to keep an eye on the job and correct it as you go.
- To avoid as much as possible, the roller marks being visible after work is completed, always start rolling on an unpainted surface and always end on an unpainted surface.
- These allow at least a day between coats to ensure the paint cures properly.
- Try a color swatch on one serving before purchasing the right amount. This will ensure that the lustre and color meet your expectations.
- If you’re taking a break, wrap your rollers and brushes in plastic bags that you can seal with rubber bands. You can reuse them later without cleaning them.
- Apply the paint without forcing too much.
- Once your project is finished, bring your paint residues to a drop-off point so that they can be recycled.